代寫COMP528、代做c/c++，Python程序語言
時間：2024-07-27 來源： 作者： 我要糾錯
University of Liverpool Assignment 1 Resit COMP528
In this assignment, you are asked to implement 2 algorithms for the Travelling Salesman
Problem. This document explains the operations in detail, so you do not need previous
knowledge. You are encouraged to begin work on this as soon as possible to avoid the queue
times on Barkla closer to the deadline. We would be happy to clarify anything you do not
understand in this report.
1 The Travelling Salesman Problem (TSP)
The travelling salesman problem is a problem that seeks to answer the following question:
‘Given a list of vertices and the distances between each pair of vertices, what is the shortest
possible route that visits each vertex exactly once and returns to the origin vertex?’.
(a) A fully connected graph
(b) The shortest route around all vertices
Figure 1: An example of the travelling salesman problem
The travelling salesman problem is an NP-hard problem, that meaning an exact solution
cannot be solved in polynomial time. However, there are polynomial solutions that can
be used which give an approximation of the shortest route between all vertices. In this
assignment you are asked to implement 2 of these.
1.1 Terminology
We will call each point on the graph the vertex. There are 6 vertices in Figure 1.
We will call each connection between vertices the edge. There are 15 edges in Figure 1.
We will call two vertices connected if they have an edge between them.
The sequence of vertices that are visited is called the tour. The tour for Figure 1(b) is
(0, 2, 4, 5, 3, 1, 0). Note the tour always starts and ends at the origin vertex.
A partial tour is a tour that has not yet visited all the vertices.
2023-2024 1University of Liverpool Assignment 1 Resit COMP528
2 The solutions
2.1 Preparation of Solution
You are given a number of coordinate ffles with this format:
x, y
4.81263062736921, 8.34719930253777
2.90156816804616, 0.39593575612759
1.13649642931556, 2.27359458630845
4.49079099682118, 2.97491204443206
9.84251616851393, 9.10783427307047
Figure 2: Format of a coord ffle
Each line is a coordinate for a vertex, with the x and y coordinate being separated by a
comma. You will need to convert this into a distance matrix.
0.000000 8.177698 7.099481 5.381919 5.087073
8.177698 0.000000 2.577029 3.029315 11.138848
7.099481 2.577029 0.000000 3.426826 11.068045
5.381919 3.029315 3.426826 0.000000 8.139637
5.087073 11.138848 11.068045 8.139637 0.000000
Figure 3: A distance matrix for Figure 2
To convert the coordinates to a distance matrix, you will need make use of the euclidean
distance formula.
d =
p
(xi − xj )
2 + (yi − yj )
2
Figure 4: The euclidean distance formula
Where: d is the distance between 2 vertices vi and vj
, xi and yi are the coordinates of the
vertex vi
, and xj and yj are the coordinates of the vertex vj
.
2023-2024 2University of Liverpool Assignment 1 Resit COMP528
2.2 Smallest Sum Insertion
The smallest sum insertion algorithm starts the tour with the vertex with the lowest index.
In this case that is vertex 0. Each step, it selects a currently unvisited vertex where the
total edge cost to all the vertices in the partial tour is minimal. It then inserts it between
two connected vertices in the partial tour where the cost of inserting it between those two
connected vertices is minimal.
These steps can be followed to implement the smallest sum insertion algorithm. Assume
that the indices i, j, k etc; are vertex labels unless stated otherwise. In a tiebreak situation,
always pick the lowest index(indices).
1. Start off with a vertex vi.
4
Figure 5: Step 1 of Smallest Sum Insertion
2. Find a vertex vj such that
Pt=Length(partialtour)
t=0
dist(vt
, vj ) is minimal.
Figure 6: Step 2 of Smallest Sum Insertion
3. Insert vj between two connected vertices in the partial tour vn and vn+1, where n is a
position in the partial tour, such that dist(vn, vj ) + dist(vn+1, vj ) - dist(vn, vn+1) is
minimal.
4. Repeat steps 2 and 3 until all of the vertices have been visited.
2023-2024 3University of Liverpool Assignment 1 Resit COMP528
Figure 7: Step 3 of Smallest Sum Insertion
4
(a) Select the vertex
(b) Insert the vertex
Figure 8: Step 4 of Smallest Sum Insertion
(b) Insert the vertex
Figure 9: Step 5 of Smallest Sum Insertion
2023-2024 4University of Liverpool Assignment 1 Resit COMP528
4
(b) Insert the vertex
Figure 10: Step 6 of Smallest Sum Insertion
(a) Select the vertex
(b) Insert the vertex
Figure 11: Step 7 of Smallest Sum Insertion
2023-2024 5University of Liverpool Assignment 1 Resit COMP528
2.3 MinMax Insertion
The minmax insertion algorithm starts the tour with the vertex with the lowest index. In this
case that is vertex 0. Each step, it selects a currently unvisited vertex where the largest edge
to a vertex in the partial tour is minimal. It then inserts it between two connected vertices
in the partial tour where the cost of inserting it between those two connected vertices is
minimal.
These steps can be followed to implement the minmax insertion algorithm. Assume that the
indices i, j, k etc; are vertex labels unless stated otherwise. In a tiebreak situation, always
pick the lowest index(indices).
1. Start off with a vertex vi.
Figure 12: Step 1 of Minmax Insertion
2. Find a vertex vj such that M ax(dist(vt
, vj )) is minimal, where t is the list of elements
in the tour.
Figure 13: Step 2 of Minmax Insertion
3. Insert vj between two connected vertices in the partial tour vn and vn+1, where n is a
position in the partial tour, such that dist(vn, vj ) + dist(vn+1, vj ) - dist(vn, vn+1) is
minimal.
4. Repeat steps 2 and 3 until all of the vertices have been visited.
2023-2024 6University of Liverpool Assignment 1 Resit COMP528
Figure 14: Step 3 of Minmax Insertion
(a) Select the vertex
4
(b) Insert the vertex
Figure 15: Step 4 of Minmax Insertion
(a) Select the vertex
(b) Insert the vertex
Figure 16: Step 5 of Minmax Insertion
2023-2024 7University of Liverpool Assignment 1 Resit COMP528
(a) Select the vertex
4
(b) Insert the vertex
Figure 17: Step 6 of Minmax Insertion
(b) Insert the vertex
Figure 18: Step 7 of Minmax Insertion
2023-2024 8University of Liverpool Assignment 1 Resit COMP528
3 Running your programs
Your program should be able to be ran like so:
$ ./<program name >. exe <c o o r d i n a t e f i l e n a m e > <o u t p u t fil e n am e >
Therefore, your program should accept a coordinate file, and an output file as arguments.
Note that C considers the first argument as the program executable. Both implementations
should read a coordinate file, run either smallest sum insertion or MinMax insertion, and
write the tour to the output file.
3.1 Provided Code
You are provided with the file coordReader.c, which you will need to include this file when
compiling your programs.
1. readNumOfCoords(): This function takes a filename as a parameter and returns the
number of coordinates in the given file as an integer.
2. readCoords(): This function takes the filename and the number of coordinates as
parameters, and returns the coordinates from a file and stores it in a two-dimensional
array of doubles, where coords[i][0] is the x coordinate for the ith coordinate, and
coords[i][1] is the y coordinate for the ith coordinate.
3. writeTourToFile(): This function takes the tour, the tour length, and the output
filename as parameters, and writes the tour to the given file.
4 Instructions
• Implement a serial solution for the smallest sum insertion and the MinMax insertion.
Name these: ssInsertion.c, mmInsertion.c.
• Implement a parallel solution, using OpenMP,for the smallest sum insertion and the
MinMax insertion algorithms. Name these: ompssInsertion.c, ompmmInsertion.c.
• Create a Makefile and call it ”Makefile” which performs as the list states below. Without
the Makefile, your code will not grade on CodeGrade.
– make ssi compiles ssInsertion.c and coordReader.c into ssi.exe with the GNU
compiler
– make mmi compiles mmInsertion.c and coordReader.c into mmi.exe with the
GNU compiler
2023-2024 9University of Liverpool Assignment 1 Resit COMP528
– make ssomp compiles ompssInsertion.c and coordReader.c into ssomp.exe with
the GNU compiler
– make mmomp compiles ompmmInsertion.c and coordReader.c into mmomp.exe
with the GNU compiler
– make issomp compiles ompssInsertion.c and coordReader.c into issomp.exe with
the Intel compiler
– make immomp compiles ompmmInsertion.c and coordReader.c into immomp.exe
the Intel compiler
• Test each of your parallel solutions using 1, 2, 4, 8, 16, and 32 threads, recording
the time it takes to solve each one. Record the start time after you read from the
coordinates file, and the end time before you write to the output file. Do all testing
with the large data file.
• Plot a speedup plot with the speedup on the y-axis and the number of threads on the
x-axis for each parallel solution.
• Plot a parallel efficiency plot with parallel efficiency on the y-axis and the number of
threads on the x-axis for each parallel solution.
• Write a report that, for each solution, using no more than 1 page per solution,
describes: your serial version, and your parallelisation strategy.
• In your report, include: the speedup and parallel efficiency plots, how you conducted
each measurement and calculation to plot these, and screenshots of you compiling and
running your program. These do not contribute to the page limit.
• Your final submission should be uploaded onto CodeGrade. The files you
upload should be:
1. Makefile
2. ssInsertion.c
3. mmInsertion.c
4. ompssInsertion.c
5. ompmmInsertion.c
6. report.pdf
7. The slurm script you used to run your code on Barkla.
2023-2024 10University of Liverpool Assignment 1 Resit COMP528
5 Hints
You can also parallelise the conversion of the coordinates to the distance matrix. When
declaring arrays, it’s better to use dynamic memory allocation. You can do this by:
int ∗ o n e d a r ra y = ( int ∗) malloc ( numOfElements ∗ s i z e o f ( int ) ) ;
For a 2-D array:
int ∗∗ twod a r ra y = ( int ∗∗) malloc ( numOfElements ∗ s i z e o f ( int ∗ ) ) ;
for ( int i = 0 ; i < numOfElements ; i ++){
twod a r ra y [ i ] = ( int ∗) malloc ( numOfElements ∗ s i z e o f ( int ) ) ;
}
5.1 MakeFile
You are instructed to use a MakeFile to compile the code in any way you like. An example
of how to use a MakeFile can be used here:
{make command } : { t a r g e t f i l e s }
{compile command}
s s i : s s I n s e r t i o n . c coordReader . c
gcc s s I n s e r t i o n . c coordReader . c −o s s i . exe −lm
Now, on the command line, if you type ‘make ssi‘, the compile command is automatically
executed. It is worth noting, the compile command must be indented. The target files are
the files that must be present for the make command to execute.
This command may work for you and it may not. The point is to allow you to compile
however you like. If you want to declare the iterator in a for loop, you would have to add the
compiler flag −std=c99. −fopenmp is for the GNU compiler and −qopenmp is for the
Intel Compiler. If you find that the MakeFile is not working, please get in contact as soon
as possible.
Contact: h.j.forbes@liverpool.ac.uk
2023-2024 11University of Liverpool Assignment 1 Resit COMP528
6 Marking scheme
1 Code that compiles without errors or warnings 15%
2 Same numerical results for test cases (tested on CodeGrade) 20%
3 Speedup plot 10%
4 Parallel Efficiency Plot 10%
5 Parallel efficiency up to 32 threads (tests on Barkla yields good efficiency
for 1 Rank with 1, 2, 4, 8, 16, 32 OMP threads)
15%
6 Speed of program (tests on Barkla yields good runtime for 1, 2, 4, 8, 16,
32 ranks with 1 OMP thread)
10%
7 Clean code and comments 10%
8 Report 10%
Table 1: Marking scheme
The purpose of this assessment is to develop your skills in analysing numerical programs and
developing parallel programs using OpenMP. This assessment accounts for 40% of your final
mark, however as it is a resit you will be capped at 50% unless otherwise stated by the Student
Experience Team. Your work will be submitted to automatic plagiarism/collusion detection
systems, and those exceeding a threshold will be reported to the Academic Integrity Officer for
investigation regarding adhesion to the university’s policy https://www.liverpool.ac.uk/
media/livacuk/tqsd/code-of-practice-on-assessment/appendix_L_cop_assess.pdf.
7 Deadline
The deadline is 23:59 GMT Friday the 2nd of August 2024. https://www.liverp
ool.ac.uk/aqsd/academic-codes-of-practice/code-of-practice-on-assessment/
2023-2024 12
請加QQ：99515681 郵箱：99515681@qq.com WX：codinghelp
標簽：
掃一掃在手機打開當前頁
注：本網條致力提供真實有用信息，所轉載的內容，其版權均由原作者和資料提供方所擁有！若有任何不適煩請聯系我們，將會在24小時內刪除。
昆明生活資訊
昆明圖文信息
|
|
|
|
|
|
|
|
推薦信息
相關文章